JIGSAW

A jigsaw is now an electrical tool for slicing of plates and boards.
With a saber saw is a small or and thin saw blade fixed unilaterally. The saw blade can be with the free end of the material to cut through to groove, but this is a hole, like a bore, necessary. Due to the limited width of the saw blade can be in this relatively tight curves and curved lines made of materials cut.

STRENGTH

The strength of the jigsaw is that man from thin slabs, boards or bar-shaped parts Section, prior to drilling through the material from its interior.
The saw blade is cutting back modern Stich of having a role to the saw blade gives a more precise guidance. 

JIGSAW VARIATIONS:

1. THE PENDULUM JIGSAW

A variant is the pendulum jigsaw where the saw blade forward and reverse commutes, so that the sawdust better ejected. The saw performance is significantly higher compared to a chainsaw without a pendulum.

The jigsaw has its main application area as assembly saw. Besides saw blades is also available as rasps and files.

However, the jigsaw competes in this field with so-called saber saws, in which the saw blade is not down from the machine outside but forward, but the machine body to a similar drill. Such saber saws suitable for fast, although not necessarily very precise cuts in board materials and solid wood, but also in metal.

2. THE ROUTER

In the field of wood processing, in some countries, instead of the jigsaw very often a router, which according to the material with thin routers three 3 mm machine. Day by day more inventions are made by producers. So, it will be often not easy to make a choice. So, now one can benefit from new techniques and handle new and unusual situations

3. THE HANDFUL ROUTER

A handful router is a versatile power tool for chipping processing of timber and other materials.
A handful router consists of a mostly gearless electric motor whose speed at 8,000 and to 30,000 rpm, a clamp (the clamping areas in the rule 4 and to 12 mm) to the clamping of the cutting tools and a two pillars guided milling basket, between its hub 35 and to 80 mm.

The leadership pillars are on a stable aluminum base plate attached. The base plate can be used with sliding or removable plastic sliding on. At this base plate can be attacks and guided tours of various kinds install so that, for example, with a cam also attack circles or milling circle segments.

The hand router is ideal for standing by grooves, edges milling and profiling, stencils and freehand milling machines. Examples could be ornaments, patterns, fonts and others.

STRENGTH

The hand routers have mostly a wave velocity between 10,000 and 20,000 Upm. The engine is mostly up to 1.5 KW of vert. movement (of the wave 80 millimeters). The table surface belongs to the acquaintance dimensions of 480 x 650 millimeters and the table height is commonly at 860 millimeters.